
Watch it draw itself · tap to replay
How to Draw a Spartan Helmet
Draw a Spartan helmet in 11 easy steps, about 8 minutes. Free, with a printable worksheet.
Each picture adds one red line. Draw that line, then scroll to the next picture. Rub out any dashed helper lines at the end. First up: helmet shell.
Step 1: Helmet shell
Draw a tall dome with long sides and a flat bottom, like a big upside-down U closed off underneath.
Step 2: T face opening
Inside, draw a big T-shaped hole: 2 wide eye slots, a nose guard between them, a narrow gap below.
Tip The T is the famous Spartan face hole. The sides of the gap are the cheek guards.
Step 3: Two big eyes
In each eye slot draw a big round eye. Fill most of it with a black dot.
Step 4: Tall plume
On top of the dome draw a tall plume that fans out wide, with a round top.
Step 5: Horsehair lines
Inside the plume draw 3 long lines from the dome up toward the top, fanning out like hair.
Step 6: Rivets
On the dome draw 4 tiny round rivets in a gentle arc, 2 on each side.
Step 7: Ground
Draw one straight ground line under the helmet, right along its flat bottom edge.
Step 8: Yellow rivets
Colour the 4 rivets yellow.
Step 9: Bronze helmet
Colour the helmet ginger like bronze, around the rivets. Leave the T hole white for now.
Step 10: Red plume
Colour the tall plume red.
Step 11: Dark inside
Colour the T hole dark grey around the eyes. Leave the eyes white. Your spartan helmet is done!

Your finished drawing
Follow the steps above and this is where you end up: a Spartan helmet, drawn by you.
Every step in one picture
