Watch it draw itself · tap to replay
How to Draw a Flaming Heart
Draw a flaming heart in 10 easy steps, about 8 minutes. Free, with a printable worksheet.
Each picture adds one red line. Draw that line, then scroll to the next picture. Rub out any dashed helper lines at the end. First up: the big heart.
Step 1: The big heart
In the lower half of your paper draw a big heart: 2 fat humps on top, a point below.
Tip Leave the top half empty for the flames.
Step 2: Tall middle flame
Start on the left hump. Draw a tall flame up to a point, then down to the right hump.
Tip A flame is fat at the bottom and pointy on top.
Step 3: Two side flames
On each side, start on the heart. Curve out and up to a point, then back to the tall flame.
Step 4: Two small flames
Lower down each side, draw a smaller flame. Start on the heart and stop on the side flame.
Step 5: Inner flame
Inside the tall flame, start in the heart's dip. Draw a thin flame up to a point and back down.
Step 6: Two sparks
Draw a tiny teardrop spark floating on each side of the tall flame's tip.
Step 7: The shine
On the right hump of the heart, draw a small curved sausage for a shine.
Step 8: Yellow flame
Go over your lines. Colour the inner flame and the 2 sparks yellow.
Step 9: Orange flames
Colour the 5 big flames orange, around the yellow flame.
Step 10: Red heart
Colour the heart red, around the shine. Leave the shine white. Your flaming heart is done!
Your finished drawing
Follow the steps above and this is where you end up: a flaming heart, drawn by you.
Every step in one picture
