Watch it draw itself · tap to replay
How to Draw a Conveyor
Draw a conveyor in 11 easy steps, about 8 minutes. Free, with a printable worksheet.
Each picture adds one red line. Draw that line, then scroll to the next picture. Rub out any dashed helper lines at the end. First up: the belt.
Step 1: The belt
Across the middle draw a long flat band with round ends, as wide as the paper and a thumb tall.
Tip 2 long straight lines joined by a round end on each side.
Step 2: End rollers
Inside each round end draw a circle for the big roller, leaving a ring of belt round it.
Step 3: Little rollers
Along the middle of the belt draw 3 small circles, evenly spaced, for the little rollers.
Step 4: The legs
Start under the belt near each end. Draw a leg that gets wider going down, ending in a flat foot.
Step 5: A parcel face
On the belt, left of the middle, draw a tall box with a lid line. Add eyes and a smile.
Step 6: A taped box
To the right draw a smaller box on the belt, with a line down and a line across for tape.
Step 7: A ball
Near the right end draw a round ball sitting on the belt, with a curved line across its top.
Step 8: The ground
Start at the left. Draw a ground line under both feet, across to the right.
Step 9: Pink cheeks, tan boxes
Give the face 2 pink cheeks. Colour both boxes tan, around the cheeks. Keep the eyes white.
Step 10: Grey rollers and legs
Colour all 5 rollers and both legs grey.
Step 11: Red ball, dark belt
Colour the ball red and the belt dark grey, around the rollers. Go over your lines, and you're done!
Your finished drawing
Follow the steps above and this is where you end up: a conveyor, drawn by you.
Every step in one picture
