
Watch it draw itself · tap to replay
How to Draw a Bulldozer
Draw a bulldozer in 12 easy steps, about 9 minutes. Free, with a printable worksheet.
Each picture adds one red line. Draw that line, then scroll to the next picture. Rub out any dashed helper lines at the end. First up: the cab.
Step 1: The cab
On the left of your paper draw a tall box for the cab. Round the top corners.
Step 2: Brim roof
Start on the top right corner. Draw a shallow rainbow over the box and end at the top left corner.
Tip The roof pokes out past both ends like a hat brim.
Step 3: Engine hood
Start on the cab's right wall. Draw a lower box for the engine hood, back to the wall's bottom.
Tip Round the hood's top front corner.
Step 4: Eyes, smile and cheeks
Draw 2 big eyes on the hood. Add a U smile from eye to eye, and 2 pink cheeks.
Step 5: The big window
In the cab draw one tall window with round corners, a finger in from the walls.
Tip One big window so the driver can see all round.
Step 6: Blade and arms
In front, draw a tall blade like a thick C. Draw 2 arms from the hood across to it.
Tip Keep its top and bottom flat, and let it reach lower than the cab.
Step 7: Exhaust pipe
Start on the cab roof. Draw a thin pipe up, round the top, back down to the roof.
Step 8: Track and wheels
From the cab's bottom left, draw a long pill round to the hood's bottom right. Add 4 wheels inside.
Step 9: The ground
Start left of the track. Draw a long ground line under the track and blade, stopping past the blade.
Step 10: Blue window, grey blade
Colour the window sky blue. Colour the blade and pipe light grey.
Step 11: Yellow cab
Go over your lines. Colour the cab, hood, roof and arms yellow, around the window and cheeks.
Tip Leave the eyes white.
Step 12: Dark grey track
Colour the track and wheels dark grey. Leave the hubs white.

Your finished drawing
Follow the steps above and this is where you end up: a bulldozer, drawn by you.
Every step in one picture
