Watch it draw itself · tap to replay

How to Draw a Race Car Bed

14 steps · Medium · about 11 min

Draw a race car bed in 14 easy steps, about 11 minutes. Free, with a printable worksheet.

Each picture adds one red line. Draw that line, then scroll to the next picture. Rub out any dashed helper lines at the end. First up: the car side.

Step 1: The car side
Draw a long low car: flat along the bottom, a round nose on the right, a long dip on top.
Tip Make the dip long: a whole bed has to fit in it.
Step 2: Two wheels
Draw 2 big round wheels, one near each end, hanging a little below the car.
Tip Rub out the car line inside each wheel.
Step 3: The hubs
In the middle of each wheel draw a smaller circle with a dot inside.
Step 4: Thick mattress
In the dip draw a thick mattress standing above the car's side: a long flat top, round at the front.
Step 5: Wide pillow
At the back end of the mattress draw a wide flat pillow lying on top.
Step 6: Spoiler headboard
Draw a post on the car's back and a post behind the pillow. Lay a long flat plank across both.
Step 7: The blanket
Past the pillow draw a blanket over the mattress: a bumpy top, hanging down the side to a wavy bottom.
Tip Rub out the car and mattress lines under the blanket.
Step 8: Folded edge
Start on top of the blanket, near its left side. Draw a line straight down to the wavy bottom.
Step 9: Number and headlight
Under the pillow draw a circle with a big 1 inside. Near the nose draw a small oval headlight.
Step 10: The floor
Start left of the car. Draw a long floor line under both wheels, stopping past the nose.
Step 11: Yellow and cream
Colour the headlight and the 2 hubs yellow, around their dots. Colour the mattress cream.
Step 12: Red racing car
Colour the car's side, the posts and the plank red. Leave the number circle white.
Step 13: Blue blanket
Colour the blanket blue. Leave its folded edge and the pillow white.
Step 14: Black tyres
Go over your lines. Colour both tyres and their dots black. Your race car bed is ready for bedtime!