
Watch it draw itself · tap to replay
How to Draw an A-Frame Ladder
Draw an A-frame ladder in 11 easy steps, about 8 minutes. Free, with a printable worksheet.
Each picture adds one red line. Draw that line, then scroll to the next picture. Rub out any dashed helper lines at the end. First up: left rail.
Step 1: Left rail
Draw a long thin board leaning to the right. Start on the ground and stop near the top.
Tip A step ladder has back legs too, so it stands up by itself.
Step 2: Right rail
To its right draw a second leaning board, the same height and a little closer at the top.
Step 3: Top cap
Across the 2 tops draw a flat box with round corners. Let it stick out a little at each end.
Step 4: 4 steps
Between the rails draw 4 thin flat boxes for steps, evenly spaced, each a little wider than the one above.
Step 5: Back leg
Draw a thin back leg slanting the other way. Start under the cap's right end and stop on the ground.
Step 6: Far back leg
Draw the other back leg peeking out. Start on the right rail, low down, and stop on the ground.
Step 7: Side bar
Join the right rail to the back leg with a thin flat bar, halfway up.
Step 8: Ground
Draw a ground line under all 4 legs. Start near the left edge and stop near the right.
Step 9: Tan back legs
Go over your lines. Colour the 2 back legs tan.
Step 10: Grey bar, red cap
Colour the side bar grey and the top cap red.
Step 11: Wood ladder
Colour the 2 rails and the 4 steps wood brown. Up we go!

Your finished drawing
Follow the steps above and this is where you end up: an A-frame ladder, drawn by you.
Every step in one picture
