
Watch it draw itself · tap to replay
How to Draw a Diving Board
Draw a diving board in 10 easy steps, about 8 minutes. Free, with a printable worksheet.
Each picture adds one red line. Draw that line, then scroll to the next picture. Rub out any dashed helper lines at the end. First up: the pool deck.
Step 1: The pool deck
From the left edge, low down, draw a flat deck line, then go straight down to the page bottom.
Step 2: The water
From the deck's top corner draw a wavy water line across to the right edge of the page.
Step 3: The ladder stand
On the deck draw a tall rectangle standing up for the ladder stand, with 5 short rung lines across it.
Step 4: The board
On top of the stand draw a long thick board sticking far out over the water, with a round end.
Tip Make the board as thick as 2 fingers, so it looks strong.
Step 5: Hand rail
Start on the board's back half. Draw a tall upside-down U and stop on the board. Add 1 bar across.
Tip The bar goes straight across, halfway up.
Step 6: The splash
From the water under the tip, draw a spiky splash crown back to the water. Add 2 rings, 3 drops.
Tip The rings go round the splash's base, behind its spouts. Rub out the water line inside them.
Step 7: Little waves
In the water draw 3 short bowed lines, far apart, for little waves.
Step 8: Sky blue board
Go over your lines. Colour the diving board, the splash and the ripple rings sky blue.
Step 9: Stone deck
Colour the pool deck stone grey.
Step 10: Blue water and drops
Colour the water blue around the splash and the rings. Colour the 3 drops blue too.

Your finished drawing
Follow the steps above and this is where you end up: a diving board, drawn by you.
Every step in one picture
