
Watch it draw itself · tap to replay
How to Draw a Car Wheel
Draw a car wheel in 13 easy steps, about 10 minutes. Free, with a printable worksheet.
Each picture adds one red line. Draw that line, then scroll to the next picture. Rub out any dashed helper lines at the end. First up: the tyre.
Step 1: The tyre
In the middle of your paper draw one BIG circle, almost as wide as the page.
Tip Go round lightly twice to get it smooth.
Step 2: The rim
Draw a second circle inside the big one, 2 fingers in. The fat ring between them is the tyre.
Step 3: Hub cap
Right in the middle draw a small circle for the hub cap.
Step 4: Five bolts
Inside the hub cap draw 5 tiny circles in a ring, evenly spaced. Those are the bolts.
Step 5: Top holes
Between the hub cap and the rim draw 2 holes at the top, like slices with the points cut off.
Tip The gap left between them is a spoke pointing straight up.
Step 6: More holes
Draw 3 more holes the same size: left, right and bottom. The 5 gaps between are the spokes.
Step 7: Tread ring
Draw one more circle just inside the edge of the tyre. This thin ring is the tread.
Step 8: Top tread
Across the top half of the thin ring draw 8 short lines, evenly spaced, for the tread.
Step 9: Bottom tread
Draw 8 more short lines across the bottom half of the ring. That makes 16 tread marks.
Step 10: The ground
Start at the left side and draw a straight ground line across to the right, touching the tyre.
Step 11: Grey rim
Colour the rim and the 5 spokes grey. Colour the 5 little bolts grey too.
Step 12: Dark tyre
Colour the fat tyre and its tread ring dark grey, all the way round.
Step 13: Black holes
Colour the hub cap black around the grey bolts, then the 5 holes black. Your car wheel is done!

Your finished drawing
Follow the steps above and this is where you end up: a car wheel, drawn by you.
Every step in one picture
