Watch it draw itself · tap to replay
How to Draw a Wind Turbine
Draw a wind turbine in 11 easy steps, about 8 minutes. Free, with a printable worksheet.
Each picture adds one red line. Draw that line, then scroll to the next picture. Rub out any dashed helper lines at the end. First up: tall tower.
Step 1: Tall tower
In the middle draw a tall thin tower, narrower going up, with a tiny flat top and a wide foot.
Step 2: The hub
On the tiny flat top draw a round hub, like a ball sitting on the tower.
Step 3: First blade
From the hub draw one long thin blade straight up to a pointed tip, and back down to the hub.
Step 4: Two more blades
Draw 2 more blades the same way, one pointing down right and one down left, like a peace sign.
Step 5: The ground
Draw a ground line from each bottom corner of the tower out to the edge of the paper.
Step 6: Two bushes
A little away from each side of the tower, draw a bumpy bush on the ground with one leaf line.
Step 7: The sun
In the top right draw a small round sun with 8 short rays around it.
Step 8: A cloud
In the top left draw a puffy cloud: 4 bumps over the top and 2 shallow bumps underneath.
Step 9: Yellow sun
Colour the sun yellow. Leave the tower, the blades and the cloud white.
Step 10: Green bushes
Colour the bushes leaf green.
Step 11: Grey hub
Colour the hub slate grey. Go over all your lines and your wind turbine is done!
Your finished drawing
Follow the steps above and this is where you end up: a wind turbine, drawn by you.
Every step in one picture
